Lorell LLR99531 Manual De Propietario página 5

3. The pedal assembly instruction is same for both of sides.
① Pull out the pedal
using the strap to the
level position.
4. Turn the adjustment knob counter-clockwise to loosen. Pull the knob outward and pull up on
the seat at the same time until the seat post is fully inserted.
Release the knob and slowly pull up on the seat until it locks in place. Verify that the seat will
not move up or down.
Tighten the knob by turning it clockwise until it is completely tightened.
NOTE: Do not completely remove the adjustment knob from the frame. To adjust the seat
you will need to loosen the knob and then pull the knob outward.
② Rotate the limiting square
knob 90°to fix position.
③ Tighten the pedal bolt by
using the supplied allen wrench.