Steren CCTV-905 Manual Del Usuario página 7

CONNECTIONS
1. Locate the BNC inputs on the rear panel of the recorder
2. Connect camera 1 to the input jack labeled as "CH1". Do the same
for cameras 2, 3, and 4. In the event of having cameras with audio plug
the audio cable to the entry called "AUDIO IN" and the number that
matches the camera.
3. Connect a monitor in the jack labeled as "VIDEO OUTPUT" with a
BNC connector and "AUDIO OUT" with RCA jack for audio.
4. If you wish to use a VCR, connect it to the VCR input/output jack
5. Connect the power jack to the power input and the other end to the
electrical power source.
ENGLISH-09