Installation Instruction - V-TAC VT-7573 Instrucciones De Instalación

ENGLISH
360°

INSTALLATION INSTRUCTION

1. Unlock the cup by twisting counter-clockwise.
2. Place mirror on clean surface and press down firmly just below the socket.
3. Lock mirror in place by twisting suction cup clockwise, ensuring seal.
4. Open the back cover of the mirror and place the 3*AA battery [Not included] then
put back the cover.
5. Switch on the power to test the light
Note: Suction Cups works only on clean, smooth, flat, surfaces, like any tiles, marble,
ceramic, enamel, acrylic, porcelain, glass, mirror, windows, fiberglass,etc.
MAINTENANCE
1. Always turn off the mirror before cleaning.
2. Use only a soft damp cloth or non-abrasive
cleaner to clean.