Display Messages - Uline H-2303 Manual De Instrucciones

DISPLAY MESSAGES

The AC drive input frequency reference.
The actual operation frequency at the output terminals T1, T2 and T3.
The output current present at the output terminals T1, T2 and T3.
The value of the user defined units.
The output voltage present at the output terminals T1, T2 and T3.
The temperature of the unit.
The AC drive forward run status.
The AC drive reverse run status.
Parameter group selection.
The specific parameter selection.
"End" displays for approximately 1 second if input has been accepted. After a parameter value has
been set, the new value is automatically stored into memory.
"Err" displays if the input is invalid.
PAGE 5 OF 24 0517 IH-2303