For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the tail light covers are properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
TO CONFORM WITH FEDERAL & STATE/LOCAL LAWS, TAIL LIGHT COVERS ARE INTENDED FOR SHOW,
COMPETITION, AND OFF-ROAD USE ONLY.
Contents
NOTE: Actual product may vary from illustration.
Driver Side Cover
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash your vehicle to remove any debris and/or dirt from installation area.
• Dry the installation area with a clean towel.
Installation Steps
Installation Steps
Clean taillight cover mounting location.
1
Installation Instructions
Tail Shades - Tail Shades 2
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
™
Passenger Side Cover
Clean Towel
Remove tape liners from dual-lock tabs (number
of tabs will vary by vehicle).
2
Page 1 of 2
I - Sheet Number TL01 Rev.A
™
Alcohol Prep Pad x2