LUND AVS 37768 Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the headlight covers are properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check that all components are secured.
TO CONFORM WITH FEDERAL & STATE/LOCAL LAWS, HEADLIGHT COVERS ARE INTENDED FOR SHOW,
COMPETITION, AND OFF-ROAD USE ONLY AND ARE NOT FOR USE WHEN HEADLIGHTS ARE ON.
Contents
NOTE: Actual product may vary from illustration.
Headlight Cover X2
Tools Required
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash your vehicle's headlight assembly to remove any debris and/or dirt.
• Dry the headlight assembly with a clean towel.
Installation Steps
Clean the headlight, turn signal light, and driving lights.
1
Installation Instructions
Headlight Covers
Driving Light Cover X2
NOTE: Actual application may vary slightly from illustrations.
Clean Towel
Remove red tape liners from dual-lock tabs on backside
of headlight covers to expose adhesive.
2
Page 1 of 2
I - Sheet Number HC33 Rev.A
Turn Signal Light Cover X2