Xindao Keep Fit Manual Del Usuario página 2

ENGLISH
Congratulations with your activity tracker Keep Fit! All activities are displayed on the APP after synchronizing with
the data from the wristband. Please read this manual carefully.
Please note: the screenshots differs from versions of the APP due updates of the new versions.
Device Activate & Charge
1. Charge the bracelet for 30mins before using it.
2. Make sure that the Activity tracker Keep fit is charged in order to work properly. Once the device has a low battery
status, charge the device by detaching the screen from the strap and charge the device with the charger. Clamp the
charging clip to the 3 point positioned on the back of the bracelet as below. The device will automatically boot up
when plugged in. (Connect the USB on the device into a normal DC port (5V-500mA) for charging
Before connecting with the app, please make sure the Bluetooth connection of your mobile device has been enabled.
To use activity tracker Keep Fit make sure your mobile device is connected to the internet via Wi-Fi / 4G/ 3G.
Pair the device
1. Apple iPhone (IOS 8.1 and up), please search "VeryFit 2.0" in the App store to download and install it.
2. Android phone (4.4 and up), please "VeryFit 2.0" in Google Play to download and install it.
Download the app by either scanning the QR code below or search for "VeryFit 2.0" and download in the Apple Store
or Google Playstore.
Compatible with below versions:
Apple Store:
Google Play store:
Support Bluetooth 4.0
IOS 8.1 & above
Android 4.4 and above (most common models)
2