Xindao Keep Fit Manual Del Usuario página 3

Connecting the activity tracker to the APP
Note: please keep the watch near the phone while pairing and turn on the Bluetooth on your device.
Please note: the screenshots differs from versions of the APP due updates of the new versions.
1. Pair the device
Select the device
Open the App once the app is downloaded. Please make sure your Bluetooth is
in the smart phone
ON when you pair the device. You will enter the first screen as below. Press on
searching list
"Skip" to pair with the App with the device. Once you click on the device name
YDY_P102, it will show a checkmark. Please confirm by pressing on "OK". This
means that the activity tracker is connected successfully to the APP. If there is
no devices showing up, please press on the "update" or "refresh" button and try
again until devices is showing up.
When searching and paring device, please select your device and activate the
device (screen on). App will search the device automatically, choose the device
name and connect the device to the app.
2. Customize bracelet
After connecting successfully, you can personalize and adjust your
app according to your personal information (sex, height, weight and
birthdate) and you can set your daily workout goals (sports target and
sleeping target). Enter "next" to proceed with the next step.
3. Changing modus
Once the device is connected to the app successfully, it will immediately
start recording and analyzing your activities and sleep automatically.
Press on the button of the activity tracker screen, which is located on
the side in order to switch into different display modes as followings:
3