3. Installation Instruction
1)
Connect the front tube with the frame, and install the plain
washer 8, washer 8 to the bolts and put on the cover-shaped
screws. And use open spanner to fasten them. Installation of
back tube is the same.
Note: Please adjust the black feet strap to make it balance if it is
not stable.
2)
The feet straps are marked with L and R. Please drop 2
red screws locking liquid in R strap and fasten it with right
threaded hole by using our spanner. And drop 2 red screws
locking liquid in L strap and fasten it with left threaded hole.
(Note: L and R are marked in crank as well. Please install them
accordingly otherwise it will damage the products. And please
fasten the feet strap, or it will fall down after long usage.)
-4-
EN