CITYSPORTS CS08 Manual Del Usuario página 7

3) Take out the handle and then put four holes of handle into
screwed hole,next put washer and through Cylinder head
screw, then support by screws one by one.
Take out the armrest cover, as shown on the right. Press the
cover lightly and the clasp on the armrest will be automatically
fastened.
4) Install the Monitor (first remove the screw gasket of the elec-
tronic watch)
Align the hole of the Monitor with the hole of the fixed piece of the
Monitor, then take the screw to align the hole. Use tools and then
fix the Monitor. Insert the wire into the Monitor.
-5-
EN