Installation - Glacier bay PREMIUM POLE CADDY 2133NSHD Guía De Uso Y Cuidado

Installation (continued)

Installation

7
Preparing assembly for installation
□ Place the tape strips (DD) around the seams of the tubes.
8
Installation
WARNING: Injury may occur if you do not install the top
of the assembly onto the ceiling first.
□ Slip the tapered end of the short tapered tube (D) into the
untapered end of the bottom tube of the assembly.
□ Place the soft vinyl end cap (CC) on the short tapered
tube (D).
□ Lift the entire assembly into position over the shower stall.
□ Compress the top of the unit against the ceiling at the
desired location.
□ Move the bottom end into place on the shower floor so that
the unit is in a vertical position.
DD
8
bottom shelf assembly
D
CC