Pre-installation
PLANNING INSTALLATION
Before beginning assembly, installation, or operation of the product, make sure all parts are present. Compare parts
with package contents list and hardware contents list above. If any part is missing or damaged, do not attempt to
assemble, install, or operate the product. Contact Customer Service for replacement parts.
This light fixture is suitable for wall mounting or eave mounting only. It is not suitable for ground mounting
installation. The light fixture should be mounted a minimum of 6.5 ft. (2.0 m) above the ground. If two walls
intersect, the distance between the intersecting line and the light fixture should be more than 2 ft. (0.6 m).
note: Keep your receipt and these instructions for proof of purchase.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the
installation.
TOOLS REqUIRED
Wire
Strippers
Philips
Screwdriver
PACKAGE CONTENTS
Part
Description
A
Light Head
B
Light Fixture Base
C
Photocell
HARDWARE INCLUDED
note: Hardware not shown to actual size.
Part
Description
AA
Mounting Screw (long)
BB
Mounting Screw (short)
CC
Grounding Screw (green)
DD
Rubber Plug
EE
Wire Connector
FF
Mounting Bracket
GG
Foam Gasket
HH
Rubber Cover
Safety
Goggles
Electrical
Tape
C
quantity
2
B
1
1
quantity
1
2
1
1
3
1
1
1
3
Ladder
Wire
Cutters
AA
DD
GG
Please contact 1-877-527-0313 for further assistance.
Silicone
Sealant
Gloves
A
BB
EE
HH
HOMEDEPOT.COM
FF