Care & Cleaning; Troubleshooting - Commercial Electric 51405141 Guía De Uso Y Cuidado

Care & Cleaning
CaUtion: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from
the fuse box.
□
Clean the fixture with a soft, dry cloth.
□
Do not use cleaners with chemicals, solvents, or harsh abrasives.

troubleshooting

warninG: Before doing any work on the fixture, disconnect power to the light fixture.
Minor problems often can be fixed without the help of an electrician.
Problem
The fixture will not light.
The fuse blows or the
circuit breaker trips when
the light is turned on.
The lights flash on and off.
Possible Cause
The power is off.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The photocell is not working.
The wires are crossed or the
power wire is grounding out.
The light reflected from
the wall onto the photocell
hampers the operation.
Corrective Action
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Check to ensure proper wire connections are
made. Contact a qualified electrician.
Contact a qualified electrician.
Replace the photocell according to the instructions
in the Maintenance section of this Use and Care
Guide.
Check the wire connections.
Contact a qualified electrician or call Commercial
Electric customer service 1-877-527-0313.
Reposition the light heads away from the wall.
Reinstall the light fixture with the photocell sensor
positioned at the top of the security light.
Sensor up
7
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM