PREPARATION: (Your Towel Bar comes assembled.) Use the Template Screw Hole Markings (A & C) for 18” [457 mm] and (A & B) for 24” [610 mm] to place the desired location. Template must be horizontally leveled. Using a punch or awl, tap the screw hole locations through the marks on the Template.
Página 4
BAR INSTALLATION: Insert both ends of Bar (E) into Mounting Post Holes (F). Make sure both Set Screw Holes (G) are facing down. Place Mounting Posts (H & J) over Mounting Brackets (C). Secure by tightening Set Screws (K) onto Mounting Posts.
MAINTENANCE AND CARE Cleaning Instructions: For all decorative finishes, use only a soft damp cloth to clean and shine. Use of polish, detergents, abrasive cleaners, organic solvents, or acid may cause damage. Use of other than a soft damp cloth will nullify our warranty! MANTENIMIENTO Y CUIDADO Instrucciones Para Limpieza:...