Denver DSB-4020 Manual Del Usuario página 2

What's in the Box?
Remote Control Screws
Connecting Your Sound Bar to Your TV or other sources:
Illustration of the Soundbar connectors for different connections:
1a. Is an HDMI input jack on your TV labeled "ARC"?
YES
HDMI HDMI OPTICAL
ARC
Use HDMI cable (V1.4 above) to
connect the sound bar to the TV
ARC socket.
NOTE: All cables what you needed should be plugged in before Power Supplies connected.
2. Connect the Power Supplies to Sound Bar
then power Insert Power Supplies to an AC outlet.
3. Turn on your sound bar.
Placing the Soundbar on a flat and solid surface. Hold the Power button
sound bar or Press RED key on the remote control to turn it on. Selecting Mode (input source) as the following
instruction to enjoy your powerful sound. When the Soundbar is switched to standby, the red dot is turned on.
NOTE: 1. RESET: Hang up is solved by disconnecting and reconnected the power supplies.
2. It will be standby within 10 munities if no signal from Line In, BT, USB, ARC and Optical inputs. It also
will be standby if the low sound from Line In need to be heard within about 15cm distance.
DSB-4020 IB20210503
Sound bar
Power Supplies
TV
AUX
HEADPHONE
Use Optical cable to connect the
sound bar to the TV, DVD player or
set top box.
Aux Cable
NO
TV
HDMI HDMI OPTIC AL AUX
HEADPHONE
A red LED will pulse on the
front of the sound bar
indicating boot up.
User Manual
EN
HDMI-ARC HDMI-ARC
OPTICAL OPTICAL
LINE IN LINE IN
DC IN DC IN
1b. Don't have ARC or Optical output
available on your TV?
HDMI HDMI
ARC
Connecting the sound bar
identified LINE IN to the TV with
the provided AUX cable.
/MODE at the right side of the
EN
TV
OPTIC AL AUX
HEADPHONE
PAGE:2