Publicidad
Enlaces rápidos
AUTOMOTIVE PRODUCTS, INC.
SAFARI BAR ASSEMBLY
BARRA PARA PARRILLA SAFARI
MONTAGE DE LA BARRE PARE-
CHOCS SAFARI
30-0020
30-0025
MOUNT KIT
EQUIPO DE MONTAJE
JEU DE MONTAGE
30-1115
ITEM
QTY
1
1
SAFARI BAR ASSEMBLY (PURCHASED SEPARATELY)
2,3
2
BRACKET, PASSENGER (2) AND DRIVER (3)
4
2
1/2-13 X 2.00" HEX HEAD BOLT
5
2
1/2" FLAT WASHER
6
2
1/2" LOCK WASHER
1
1
BARRA PARA PARRILLA SAFARI (SE COMPRA SEPARADO)
2,3
2
SOPORTE, ACOMPAÑANTE
4
2
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 2,00"
5
2
ARANDELAS PLANAS SAE DE 1/2"
6
2
ARANDELAS DE PRESIÓN DE 1/2"
1
1
MONTAGE DE LA BARRE PARE-CHOCS SAFARI (ACHETE
SEPAREMENT)
2,3
2
SUPPORTS,PASSAGER (2) ET CONDUCTEUR (3)
4
2
BOULON A TETE HEXAGONALE DE 1/2-13 X 2,00 PO
5
2
RONDELLE PLATE 1/2 PO
6
2
RONDELLE A FREIM DE 1/2 PO
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions
completely before beginning.
.
STEP 2
Determine passenger and driver brackets.
.
STEP 3
Remove six screws from lower part of bumper that secures the plastic shroud. Move plastic shroud to
gain access to tow hook bolts.
STEP 4.
Locate the 10mm bolts that attach the tow hooks to the frame.
STEP 5.
Remove the two front bolts from each side and attach brackets and replace fasteners.
STEP 6.
Attach Safari Bar to mount brackets using 1/2" stainless steel fasteners. Level and adjust Safari Bar as
desired and tighten all fasteners.
fasteners and 35 Ft. Lbs. for 10mm fasteners.
STEP 7.
Re-install screws that secure plastic shroud.
FINISH PROTECTION
Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive
wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish
and open it to corrosion.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 1999 1/2-04 NISSAN PATHFINDER
APLICACIÓN: NISSAN PATHFINDER, MOD. 1999 1/2-2004
APPLICATION: NISSAN PATHFINDER 1999 1/2-04
1
CONTENTS -
CONTENIDO
(2)
Y EL CONDUCTOR
SEE FIGURE 2.
1999 1/2-04 INFINITY Q X4
INFINITY Q X4, MOD. 1999 1/2-2004
INFINITY Q X4 1999 1/2-04
2
- CONTENU
(3)
Recommended torque values are 64 Ft. Lbs. for 1/2"
WO:
3
TOOLS -
HERRAMIENTA
3/4" SOCKET
14MM SOCKET
RATCHET
TORQUE WRENCH
DADO DE 3/4"
DADO DE 14MM
MANERAL
LLAVE DE TORQUE
DOUILLE 3/4 PO
DOUILLE 14MM
CLIQUET
CLE DE COUPLE
75-0245 REVISION B 11/30/07
- OUTILS
Publicidad
Manuales relacionados para Westin 30-0020
Resumen de contenidos para Westin 30-0020
- Página 1 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Página 2 PROTECTION DE LA FINISSION Les produits Westin ont une finission de haute qualité qui requiert des soins, comme toute autre finission du véhicule exposée aux éléments. Protégez la finission à l’aide d’une cire non-abrasive (par exemple, Pure Carnauba) de façon régulière. L’usage de tout savon, pâte à polir ou cire contenant un abrasif est nuisible, puisque les composantes strient la finission et la laissent vulnérable à...