Publicidad
Enlaces rápidos
AUTOMOTIVE PRODUCTS, INC.
SAFARI BAR ASSEMBLY
BARRA PARA PARRILLA SAFARI
MONTAGE DE LA BARRE PARE-
CHOCS SAFARI
30-0000
30-0005
MOUNT KIT
EQUIPO DE MONTAJE
JEU DE MONTAGE
30-1415
ITEM
QTY
1
1
SAFARI BAR ASSEMBLY (PURCHASED SEPARATELY)
2,3
2
BRACKET, PASSENGER (2) AND DRIVER (3)
4
2
1/2-13 X 2.00" HEX HEAD BOLT
5
2
1/2" FLAT WASHER
6
2
1/2" LOCK WASHER
1
1
BARRA PARA PARRILLA SAFARI (SE COMPRA SEPARADO)
2,3
2
SOPORTE, ACOMPAÑANTE (2) Y EL CONDUCTOR (3)
4
2
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 2,00"
5
2
ARANDELAS PLANAS SAE DE 1/2"
6
2
ARANDELAS DE PRESIÓN DE 1/2"
1
1
MONTAGE DE LA BARRE PARE-CHOCS SAFARI (ACHETE SEPAREMENT)
2,3
2
SUPPORTS, PASSAGER
4
2
BOULON A TETE HEXAGONALE DE 1/2-13 X 2,00 PO
5
2
RONDELLE PLATE 1/2 PO
6
2
RONDELLE A FREIM DE 1/2 PO
Remove the contents from box and check for damage. Verify all parts are present. Read instructions
STEP 1.
completely before beginning.
.
Determine passenger and driver brackets.
STEP 2
Remove factory 10mm bumper support bolts. Attach brackets to vehicle using factory 10mm bumper
STEP 3.
bolts. SEE FIGURE 1.
Using a silver marker or light colored paint pen, mark the center hole location on the backside of the
STEP 4.
airdam. SEE FIGURE 2.
Remove brackets. Drill through the backside of the airdam where marked using a small drill bit. Drill
STEP 5.
thought the front side using a 2.50" hole saw. Reattach brackets with factory 10mm bumper bolts.
Attach Safari Bar to brackets using 1/2-13 x 2.00" hex head bolt, 1/2" flat washer and lock washer as
STEP 6.
shown. SEE FIGURE 3.
Level and adjust Safari Bar as desired and tighten all fasteners. Recommended torque values are 31 Ft.
STEP 7.
Lbs. for 10mm bolts and 43 Ft. Lbs. for 1/2" fasteners.
FINISH PROTECTION
Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive
wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish
and open it to corrosion.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2008 BUICK ENCLAVE/2007-08 GMC ACADIA/2007-08 SATURN OUTLOOK
APLICACIÓN:
2008 BUICK ENCLAVE/2007-08 GMC ACADIA/SATURN OUTLOOK
APPLICATION: 2008 BUICK ENCLAVE/2007-08 GMC ACADIA/SATURN OUTLOOK 2007-2008
1
CONTENTS - CONTENIDO - CONTENU
(2)
ET CONDUCTEUR
3/4" SOCKET
3/4" WRENCH
15MM SOCKET
15MM WRENCH
DRILL
DRILL BIT
2.50" HOLE SAW
DADO DE 3/4"
LLAVE DE TUERCAS DE 3/4"
DADO DE 15MM
LLAVE DE TUERCAS DE 15MM
TALADRO
BROCA
SIERRA PERFORADORA DE
2,5"
DOUILLE 3/4" PO
(3)
CLE 3/4 PO
DOUILLE 15MM
CLE 15MM
PERCEUSE
MECHE
SCIE CLOCHE DE 2,50 POUCES
WO:
2
3
TOOLS - HERRAMIENTA - OUTILS
MARKING PEN
RATCHET
TORQUE WRENCH
75-0840 REVISION 7/18/07
, MOD. 2007-2008
MARCADOR
MANERAL
LLAVE DE TORQUE
STYLO MARQUEUR
CLIQUET
CLE DE COUPLE
Publicidad
Manuales relacionados para Westin 30-0000
Resumen de contenidos para Westin 30-0000
- Página 1 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Página 2 PROTECTION DE LA FINISSION Les produits Westin ont une finission de haute qualité qui requiert des soins, comme toute autre finission du véhicule exposée aux éléments. Protégez la finission à l’aide d’une cire non-abrasive (par exemple, Pure Carnauba) de façon régulière. L’usage de tout savon, pâte à polir ou cire contenant un abrasif est nuisible,...
- Página 3 FIGURA 3 LADO DEL ACOMPANANTE DELANTERO FIGURA 3 LADO DEL ACOMPANANTE DELANTERO FIGURE 3 CÔTÉ PASSAGER DEVANT FIGURE 3 CÔTÉ PASSAGER DEVANT Thank You for choosing Westin products Westin Automotive Products, Inc. For additional installation assistance please call 5200 N. Irwindale Ave. Suite 220 Irwindale, Ca.