Remote Sensor - Oregon Scientific RAR381 Manual Del Usuario

NOTE Install batteries in the remote sensor before the
main unit. Press RESET after each battery change. Do
not use rechargeable batteries. We recommend that
you use alkaline batteries with this product for longer
usage and lithium batteries in temperatures below
freezing.
shows when batteries are low.
UNIT LOCATION
Main Indoor temperature area
Remote Outdoor temperature area

REMOTE SENSOR

The sensor collects temperature readings approx.
every 40 seconds and sends them to the main unit. The
main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Slide open the battery door.
2. Insert the batteries, matching the polarity (+ / -).
Reset after each battery change.
RAR381_M_EN_R1.indd 4
All manuals and user guides at all-guides.com
3. Select a channel. Make sure you use a different
4. Close the battery compartment.
5. Secure the sensor in the desired location using the
For best results:
•
•
•
4
channel for each sensor.
wall mount or table stand.
Place the sensor out of direct sunlight and moisture.
Do not place the sensor more than 30 meters (100
feet) from the main (indoor) unit.
Position the sensor so that it faces the main (indoor)
unit, minimizing obstructions such as doors, walls,
and furniture.
2006.6.27 11:24:07 AM