Publicidad
Enlaces rápidos
1. Assemble Hose To Tank
IMPORTANT: Do not attempt to heat or alter hose
or hose nut.
1. Align hose and screw on to tank. (See Figure A).
2. Tighten with two 5/8" wrench. (See Figure B).
2. Assemble 18" Extension
Remove cap and place check valve inside of extension.
Then place 4-way nozzle on extension and fasten tightly.
(See Figure C)
Note: Check valve must always be used.
3. Assemble Shut-off to Hose
Screw on SS Shut-off to end of hose from sprayer
(See Figure D)
4. Assemble Wand to Shut-off
Screw on Wand Assembly to SS Shut-off
(See Figure E)
SETTING UP YOUR S100
STAINLESS PROFESSIONAL SPRAYER
190441
Figure A
182659 12" EXTENSION"
Check Valve
Option Nozzle: Please refer to manual for
options of nozzles for your sprayer.
Extension cap
182465 SS Shut-off
Wand Assembly
Figure E
Figure B
Figure C
Sprayer Hose
Figure D
182465 SS Shut-off
Publicidad
Manuales relacionados para Smith Performance Sprayers S100
Resumen de contenidos para Smith Performance Sprayers S100
- Página 1 SETTING UP YOUR S100 STAINLESS PROFESSIONAL SPRAYER 190441 1. Assemble Hose To Tank IMPORTANT: Do not attempt to heat or alter hose or hose nut. 1. Align hose and screw on to tank. (See Figure A). 2. Tighten with two 5/8” wrench. (See Figure B).
- Página 2 PARTS INCLUDED WITH YOUR S100 SPRAYER 190441 182639 182786 ASSEMBLY 12” CHECK VALVE SS EXTENSION 182643 SEAL KIT S100 182570 HOSE 50” 182379 4-WAY 182465 BRASS NOZZLE SS SHUT-OFF COMPRESSION SPRAYER Use and Care Manual Lifetime Limited Warranty On Tank and Frame, Garantia limitada de por vida ensamblaje de Garantle limitée á...