Error Codes - LG LDP681 Serie El Manual Del Propietario

56 TROUBLESHOOTING

Error Codes

Problem
Water inlet problem.
Check for a clogged, kinked or frozen water inlet hose.
Check water supply.
Drainage Problem.
Check for a clogged, kinked or frozen water drain hose.
Air gap or disposal is clogged.
Clean air gap or disposal.
Filters are clogged.
Clean Filters.
Oversudsing caused by improper detergent, such as liquid dish soap
Do not use hand dishwashing liquids.Only use detergents which are designed for use in
automatic dishwashers.
A bE error can appear if dishes soiled with a lot of foamy food, such as whipped cream, are
loaded in the appliance. To clear the error, turn the appliance off and start a new cycle.
a shallow bowl, place it in the upper rack and then run the appliance on the Auto cycle.
Failure to level dishwasher.
Make sure that the appliance is properly leveled.
Water leakage
Turn off the water supply to the dishwasher and call an LG Electronics Customer
Information Center at 1-800-243-0000 (U.S.A.) or 1-888-542-2623 (Canada).
The dishwasher makes an alert sound for 10 seconds, and runs the drain pump
intermittently. If power is turned off to the machine, the machine powers back on
automatically until the AE error is resolved.
Excessive Water supplied.
Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.)
1-888-542-2623 (Canada).
Heater circuit failure.
Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.)
1-888-542-2623 (Canada).
Thermistor failure.
Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.)
1-888-542-2623 (Canada).
Motor trouble
Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.)
1-888-542-2623 (Canada).
Vario motor trouble
Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.)
1-888-542-2623 (Canada).
Possible Cause & Solution