Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Measurement
B
ODY TEMPERATURE
•
Press
thermometer and it displays boot screen (fig. 9.1).
After POST and two beeps, it will display value of
room temperature and be ready for measurement
(fig. 9.2).
•
Make sure the thermometer is under body mode.
•
Keep distance at less than 5cm from upper
eyebrows
measurement button and when it gives a "beep"
measurement value is exceeding alarm value
(Defaulted value is 38°C), it will give 3 beeps as an
indication.
•
After measurement, if the thermometer is idle in
20 seconds, it will display "OFF" (fig. 9.5) and gives
a beep and shut off automatically.
IACER Srl
measurement
to
the
button
probe
(fig.
8
ENG
to
turn
on
9.3).
Press
MNPG314-00
Publicidad
Tabla de contenido
