Connection Setup - Coleman SRP-40A Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Congratulations on your Coleman® solar product purchase. This product is designed to the highest technical specifica-
tions and standards. It will supply years of maintenance free use. Please read these instructions thoroughly prior to instal-
lation, then store in a safe place for future reference. If at any time you are unclear about this product, or require further
assistance please do not hesitate to contact our trained professionals operating the customer support line at 1-888-478-6435
or email to info@sunforceproducts.com.
What's included: Wire connected to solar panel 6.7 ft. (2.04 m), extension wire 8 ft. (2.4 m), Battery Clamps, Voltage tester
with Quick Connect, 7 Amp Solar Charge Controller with Quick Connect Technology
Power Rating: Maximum rating 40 Watts (under ideal conditions)
Current: 2.3 Amps @ 17.1V
FEATURES:
• High efficiency crystalline solar cells
• Quickly connects and disconnects to the battery
• Overcharge and discharge protected
• Weatherproof solar panel
• Includes foldable stand
• Conveniently comes with extension cable
• Maintenance free, lightweight compact design
OPERATING INSTRUCTIONS
For optimal power, ensure the panel is directly facing the sunlight.
WARNING:
• Follow the below instructions carefully to not cause any bodily harm
• Correct polarity must be observed for product to function properly and safely
• Risk of fire, electric shock, and injury to persons if operating instructions are not followed
• Any misuse or tampering of the product and/or any included accessories will void warranty and may cause bodily harm
• Follow all safety instructions provided by the battery manufacturer when handling 12V batteries. Always wear safety
glasses. Keep sparks, flames and cigarettes away from batteries at all times.
• Solar charge controller must be used in an indoor and dry environment
SOLAR PANEL STAND:
On the rear of the panel, simply pull out the integrated stand. Extend stand to maximum for securing the panel.
For additional stability, add weights to the bottom of the stand (this step is optional).
Two 40 Watt solar panels can be connected together in parallel to a single 7 Amp charge controller. To achieve
this parallel connection either contact technical support or visit your local Canadian Tire Store for
additional components.

CONNECTION SETUP:

1
Under direct sun, connect the solar panel to the green LED voltage tester. If the LED illuminates, proceed with installation.

Publicidad

Tabla de contenido
loading

Tabla de contenido