Kensington Charge & Sync Cabinet Manual De Instrucciones página 5

2 Plug the USB end of the dock connector cable into the USB port on the
Charge and Sync Cabinet.
3 Plug the other end of the cable into the dock connector on the iPad.
Charge the iPads
Charging automatically begins when the dock connector is plugged into the iPad.
NOTE: The Charge and Sync Cabinet will not charge and sync the iPads at the same time.
LED Status
Green = Charged
Amber = Charging in progress
Red = Sync in process
Red Flashing = Over current protection
NOTE: Remove the Device and turn off the AC power for over current reset.
1
Cables sold separately:
K67780WW — 30 Pin, 10pk
K67781WW — Lightning, 10pk
1
5
7
6
5
4
3
2
7
6
5
4
3
2