Auxiliary Connection Signal - TECNOPLUS SISTEM-AIR TECNO PRIME Manual Integrativo

Supplementary manual TECNO Prime
ByTecnoplus
s.r.l.
CENTRAL VACUUM SYSTEMS
Reassemble the dust container in its housing under the vacuum cleaner and close it again.
Switch the vacuum cleaner on by pressing the ON/OFF switch. After restarting the central vacuum unit,
press RESET to cancel the alarm relating to the dust container (bag).

4 - AUXILIARY CONNECTION SIGNAL

Example of connection of the auxiliary contact, normally open, which closes in case of alarms on the
display.
4
Slide the dust-collecting bag from the ver-
2
tical end of the inlet opening
Introduce a new dust bag
3
Ext. supply
220Vac / 12Vdc
Led indicator
or 12V light
05/06/2019 Rev:1.0.0