Steam coming out of
the water tank lid area,
or from the rear vent
tube.
The lid will not come
off the water tank after
cooking.
After cooking, there
is water under the
appliance
IX. TECHNICAL DATA
Model: 06776
Supply voltage: 220-240 V~, 50/60 Hz
Water tank output: 500 W
Motor output: 130 W
Blender operating cycles: 10 s ON – 10 s OFF ("O")
Made in China
This product complies with the Directive 2012/19/EU as amended.
The crossed bin symbol on the appliance indicates that the product, at the
end of its life, must be disposed of separately from domestic waste, either by
taking it to a separate waste disposal site for electric and electronic appliances
or by returning it to your dealer when you buy another similar appliance. The
user is responsible for taking the appliance to a special waste disposal site at the end of
its life. If the disused appliance is collected correctly as separate waste, it can be recycled,
treated and disposed of ecologically; this avoids a negative impact on both the environ-
ment and health, and contributes towards the recycling of the product's materials. For
further information regarding the waste disposal services available, contact your local
waste disposal agency or the shop where you bought the appliance.
WARRANTY
For the warranty for product defects see the specific provisions of applicable nation-
• The water tank lid is
not inserted or is not
properly closed.
• The steam outlet is
obstructed by food
residue or limescale.
• Overheating.
• Blade unit missing or
positioned incorrectly.
• Blade seal missing or
positioned incorrectly.
32
• Position the water tank
lid and close properly.
• Perform cleaning and
maintenance on the water
tank. If necessary, clear
the steam outlet without
damaging the seal.
• Wait a few minutes and
allow to cool.
• Insert the blade unit
in the bowl and turn it
until it is securely fitted.
• Check the presence
and position of the seal.