Maintenance
Removing and Cleaning the Filter
1
5
WARNING: Always disconnect the plug from the power outlet before removing
the power head from collection tank.
1. Verify that the power cord is
disconnected from the outlet. (Fig. 1)
2. Remove lid and power head and
place in upside down position.
(Fig. 2)
3. Unlock and remove the fi lter cage
from the cage lock-clamps by turning
cage counter-clockwise. (Fig. 3 & 4)
4. Carefully remove the cartridge fi lter.
(Fig. 5)
5. Clean the cartridge fi lter by gently
tapping or brushing dirt off. (Fig. 6)
2
6
3
7
6. Carefully remove the pre-fi lter from
the tank and clean the ash or dirt
from the fi lter by gently tapping
or brushing the ash or dirt off.
(Fig. 7 & 8)
IMPORTANT! Cleaning should not
be done indoors in living areas. For
optimal performance a new fi lter is
recommended. To purchase the fi lter,
call 1-888-331-4569 or visit a Sears
store.
8
4
8