Setup Procedure; Download The Software Program - NEC NP01TM Manual De Instalación

3. Setup Procedure

Download and install the software program onto the computer.
STEP 1
STEP 2 Connect the interactive whiteboard kit to the projector for enable to use the stylus
pen.
STEP 3 Perform the calibration of the camera.
STEP 4 Mount the touch module at the top of the screen.
Connect the USB cable.
STEP 5
STEP 6 Perform the touch module adjustment.
Note:
• Concerning to details of the STEP1 (How to install the software program), the STEP3 (How
to calibrate the camera), and the STEP6 (How to adjust the touch module), refer to the
software manual that is available from our company website.

4. Download the Software Program

Perform the calibration of the camera unit for the interactive whiteboard kit and adjustment of
the touch module for using the touch module.
The exclusive software program is available from our company website. Please visit our sup-
port site also about operational conditions as supported OS:
URL: http://www.nec-display.com/dl/en/index.html
PDF (Portable Document Format) explains the operations of camera calibration by the software
program and adjustment of the touch module is available. To view or print the PDF files Adobe
TM
Reader is required.





ENG-9