Introduction; Packaged Parts - NEC NP05WK Manual De Instalación

Introduction

M Packaged Parts
Check that the parts below are included in the package.
Wall adapter: 1 set
Slide arm: 1 set
The wall adapter and slide arm are assembled
upon shipment.
Wall adapter covers: 2
These are covers for the wall adapter. The two
covers are the same.
M4×8 mm screws: 4
These are used to mount the projector.
Wall plate: 1
This is used to mount the wall adapter in the
North American region.
* For the bolts or screws for mounting the wall
adapter to the wall, use bolts or screws that
are adapted to the wall surface.
M6×10 mm screws: 4
These are used to mount the wall plate to the
wall mount unit.
Horizontally-inclined securing screws
(A): 1 unit
Spring washer (B): 1 unit
Washer (C): 1 unit
To be used by those who wants to fix the
horizontal inclination of the screen after
adjusting it. Please refer to the Install Guide
for the installation method.
Washers: 4
Spacers: 4
These are used to mount the wall adapter to
the wall.
* For the bolts or screws for mounting
the wall adapter to the wall, use bolts or
screws that are adapted to the wall sur-
face.
Height adjustment securing
screws (D) : 2 units
To be used by those who want to secure the
height of the arm after adjusting it. Please
refer to the back side of the Install Guide for
the installation method.
Hexagonal wrench: 1
This is a wrench for tightening
the safety lock screws.
Blind curtain: 1 piece
To be used by those
who want to conceal
the arm base. Please
refer to the back
page of the Quick
Install Guide for the
installation method.
Cautions on Installation: 1
These include safety precautions on install-
ing the wall mount unit, a list of the included
parts and the specifications.
Quick Install Guide: 1
This provides a simple description of the in-
stallation and adjustment procedures.
Install Guide: 1
The installation method
of the horizontally-in-
clined securing screws
and height adjustment
securing screws is pre-
sented here.
ENG-4