Spare Parts - Ghibli AS5 Uso Y Mantenimiento

Checking and cleaning the polyester
filter (if present)
- Release the levers (1 Fig. 1) and remove
the cover (2 Fig. 2) complete with motor.
- Remove the polyester (3 Fig. 2) filter
- Clean the filter (3 Fig. 17) from the in-
side out with a blast of air; the filter can
be washed (3 Fig. 17) in warm water and
must only be replaced once it is com-
pletely dry. If it is too dirty, replace it.
- Reassemble all the parts by following the
dismantling process steps in the reverse
order.
Checking the air outlet filter
- Unhook the flap (27 Fig. 18); press it
downwards "A", and then open it "B".
- Remove the filter sponge (28 Fig.19)
from the flap (27 Fig. 19) and clean it with
a blast of air .
PROBLEM
The vacuum cleaner does
not work.
Suction is not satisfactory.
-
Cleaning the appliance body
-
Do not wash the appliance using jets of
water.
Pack of 10 paper filter bags
Filter Cartridge
HEPA filter
CAUSE
Switch not pressed.
Plug not inserted.
No current.
Paper bag full.
Filter elements clogged.
Accessories or
clogged.
EN - 3
The filter sponge can be washed in warm
water and must only be replaced once it
is completely dry. If it is too dirty, replace
it with a new one.
Reassemble all the parts by following the
dismantling process steps in the reverse
order.
Clean the unit body with a cloth damp-
ened with water or a mild detergent;
DANGER:

SPARE PARTS

SOLUTION
Press the switch.
Insert the plug into the
socket.
Check the power line.
Replace the dust bag.
Clean the filter elements.
tubes Check and clean the flex-
ible hose and the suction
nozzle.
EN
code 6595030
code 6595006
code 6595007