Tabla de contenido
Publicidad
Step 4. In the eufySecurity App, go to Doorbell Settings - Indoor Chime.
Follow the onscreen instruction to add the Chime to your existing Video
Doorbell.
Step 5. You may select the ringtone and adjust the volume level by using the
Music and Volume buttons located on the side of the Doorbell Chime.
There are 8 ringtones and 3 volume levels selectable. Each Chime can play a
different ringtone according to your setting.
REPLACING THE POWER CONNECTOR
1. Press the Lock button and twist the Power Connector counterclockwise at the same
time to remove it from the Doorbell Chime base.
03 EN
2. Install the new Power Connector onto the Doorbell Chime following the same
procedure mentioned at the start of the guide.
NOTICE
This product complies with the radio interference requirements of the
European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with
the essential requirements and other relevant provisions of Directive 2014/53/
EU.For the declaration of conformity, visit the Web site
https:/ /www.eufylife.com/.
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is 0°C - 45°C.
RF exposure information: The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm between the device and the
human body. To maintain compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and human body.
433MHz Frequency Range:433.92MHZ;433MHz Max Output Power:7.303dBm
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3-5, 80807 Munich,
Germany
Anker Technology (UK) Ltd I Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom
This product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
EN 04
Publicidad
Tabla de contenido
