Observed Standards - Skymsen TG Manual De Instrucciones

shift work.
1 – Items to be verified and implemented monthly:
- Check the electrical installation;
- Check the outlet tension;
- Measure the operating current and compare it to the
nominal;
- Check all the eletrical terminal tightening of the appliance,
to avoid bad contact;
- Check the possible clearance of the shft of the electric
motor;
- Check the wiring and the eletric cable to avoid its
overheating, deficient isolation and mechanical breakdown
2 - Items to be verified and implemented monthly:
- Check the electric components as turn on/off bottom,
emergency button ,reset button, and eletric circuit related to
overheating, deficient isolation and mechanical breakdown.
- Check possible loosens in the bearings
- Check retainers, o´rings, v´rings and other sealing systems
Scan the QR Code to get information
about safety and maintenance.

7. OBSERVED STANDARDS

ABNT NBR NM 60335-1
IEC 60335-2-64
4