LG GB-B1 Serie Manual De Instrucciones

Part Names and Functions
Bluetooth Sound Bar Front panel
1 LED Indicator : Shows the status of the product.
2 Button (Pairing) : Press to connect or disconnect with a Bluetooth device.
LED status
LED turned off
LED flashes slowly
LED flashes quickly
LED turns on
Rear panel
1 Power switch
Vent hole
1 Power switch : Used to turn the power ON/OFF.
MODEL : GB-B1**
2 Power cord : Connect the power plug to an electrical outlet.
OWNER'S MANUAL
Please read this manual carefully before operating and retain it for
future reference.
http://www.lg.com
Safety Information
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
This guide contains many important safety messages. Always read and obey all safety
messages.
This is the safety alert symbol. It alerts you to safety messages that inform you of
hazards that can kill or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard
signal word WARNING or CAUTION. These words mean:
WARNING
You can be killed or seriously injured if you do not follow instructions.
CAUTION
Indicates an imminently hazardous situation which, if not avoided, may
result in minor or moderate injury, or product damage.
WARNING
To reduce the risk of fire, electric shock, or personal injury when using this product,
follow basic safety precautions, including the following:
Power
• When using a multi-electricity outlet, do not plug-in multiple products at the same time.
• Be cautious that power cord is not upturned or power plug is not pressed by the back of the
product.
• Unplug while cleaning.
• Do not touch a power plug with wet hands.
• Remove moisture and dust from the power plug first and firmly plug in to an electrical outlet.
• When unplugging, do not pull the power cord but hold the power plug.
• When power cord or an power plug are damaged, or electricity outlet holes become loose,
stop using and contact the LG Electronics service center.
• Unplug during lightning storms or when the product is not used for a long period of time.
• Do not force the power cord to be bent or damaged by placing a heavy object on it.
• Do not extend the length of the power cord or modify it.
Installation
• Do not place a heavy object on the product.
Specifications
General
1 LED Indicator
Dimensions (W x H x D) Approx. 552 mm x 33 mm x 105 mm (21.7" x 1.3" x 4.1")
Net Weight Approx. 1.1 kg (2.42 lb)
Power Consumption 4.8W
2 Button (Pairing)
Voltage Rating 100-240 V~
Operating Temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating Humidity 5 % to 90 %
Speaker status
Amplifier
Power off, disconnected
Total
5 W + 5 W(8 Ω at 1 kHz)
Turning on the power
THD 1%
Waiting for a Bluetooth connection (pairing)
Completed a Bluetooth connection (pairing)
Speaker
Type Built-in
Impedance Rate 8 Ω
Rated Input Power 5 W
Max. Input Power 10 W
2 Power cord • Design and product specifications could change without any prior notice.
• Wireless communication devices cannot be used to provide services critical to
Vent hole
personal safety because there is a possibility of electrical wave interference
while they are in use.
• This device is suitable for home (B grade) electromagnetic wave and for home
use, and it can be used in all regions.
Use
• Only qualified LG Electronics service center personnel should disassemble, repair, or modify
the product. Consult with LG Electronics service center for reinstallation.
• Do not use or stock fire devices or combustible materials (ether, benzene, alcohol, chemicals,
LP gas, combustible spray, pesticide, air freshener, cosmetics, etc.) on or near the product.
• Do not place objects, or containers with liquids or flammable substances on the product.
• Do not insert or drop metals (coins, hairpins, needles) or inflammable substances (matches,
paper) in the ventilation holes.
Disposal
• Dispose of all packing materials including vinyl and Styrofoam out of the reach of children.
WARNING
This product contains chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands after handling.
CAUTION
Installation
• Do not install in areas with high moisture or where it will be exposed to water or weather.
• Install by directly attaching on the surface of a refrigerator top.
• Do not install in a confined space such as in the drawer or kitchen sink.
• Do not install in a location which is unstable or has high vibration.
• Do not place near a magnetic field such as near a magnet.
• Do not install in direct sunlight.
Use
• Do not drop an object or inflict a shock on the product.
• Be careful when carrying the product.
• Do not use at excessive volume for a long period of time.
• Do not use the product on a blanket, an electric pad, or a carpet for a long period of time.
• Do not block the ventilation holes with tablecloths, curtains, or other obstructions.
Connecting and Disconnecting Devices
About Bluetooth.
Bluetooth is a wireless communication technology used for short distance
transmissions.
Bluetooth connections can be made within a 32-foot (10-meter) range.
(Bluetooth connections can be interfered with by radio waves or other
Bluetooth devices.)
There is no cost to connect Bluetooth devices.
Devices which support Bluetooth include mobile phones, MP3 players,
notebook computers, PDAs, and PMPs.
Bluetooth Profile.
To use this Bluetooth wireless technology, the paired device should support
the A2DP profile (Advanced Audio Distribution Profile).
1
Turn on the switch at the back of the product.
2
Enable Bluetooth on your device. When the LED indicator on the
front of the sound bar begins to flash quickly, pair the sound bar
and your Bluetooth device using Bluetooth tethering.
Within 32 ft
Troubleshooting Regulation Notice for Transmitter Module Contained in Refrigerator
No power. FCC Statement:
• Insert the power plug into the electricity outlet correctly and firmly. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• Check if the power switch is on.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
No sound or sound distortion
undesired operation.
• The unit or your smart device' s volume is set to minimum. Check and
adjust the volume of the unit or bluetooth device' s volume.
Any changes or modifications not expressly approved by the party responsible for
• When you use an external device at high volume, the sound quality
compliance could void the user' s authority to operate this equipment.
may be deteriorated. Lower the volume of the devices.
• If you use the unit for purposes other than listening to music, the
This equipment has been tested and found to comply with the limits for a Class B
sound quality may be lowered or the unit may not work properly. digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
Bluetooth pairing does not work well.
installed and used in accordance with the instructions, may cause harmful interference
• Switch bluetooth off and on again on your bluetooth device, then try
to radio communications. However, there is no guarantee that interference will not occur
pairing again.
in a particular installation. If this equipment does cause harmful interference to radio or
• Remove the obstacle in the path of the bluetooth device and the
television reception, which can be determined by turning the equipment off and on, the user
unit.
is encouraged to try to correct the interference by one or more of the following measures:
• Depending on the type of the bluetooth device or surrounding
- Increase the separation between the equipment and receiver.
environment, your device may not be paired with the unit.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
• If your bluetooth device is connected to another unit, disable that
is connected.
bluetooth connection first.
- Consult the dealer or an experienced radio/TV technician for help.
- Reorient or relocate the receiving antenna
The unit does not operate normally.
• When product doesn't operate normally, check the status after
FCC RF Radiation Exposure Statement:
turning off and turning on the power switch.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20 cm between the radiator and your body. End users must follow the specific operating
instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
3 Notice
When the sound bar is successfully paired with the Bluetooth device,
the LED indicator stays ON.
• Select "LG_Refrigerator: XXXX" in the Bluetooth device.
(XXXX stands for the last four digits of Bluetooth
address.)
4
Play music on the Bluetooth device.
• Input four-digit PIN code(0000) when required by the
Bluetooth device.
5
• Pairing method could differ by Bluetooth device.
Pressing the pairing button on the front of the sound bar or disabling
Bluetooth on your device causes Bluetooth to disconnect and the Try searching again if the address of the product is not
music to stop. found under the list of connectable devices.
• Refer to the manual of the Bluetooth device for the
method of playing music.
• After the music begins to play, make any necessary
adjustments to the volume on the Bluetooth device.
• If the product fails to pair with the Bluetooth device for
more than 10 minutes, it goes into wait mode.
• Press the pairing button to enable pairing when the
product is in wait mode.
• The Bluetooth device once paired with the product
could be paired again without pressing the button.
Caution
• When the product is turned on again after turnoff, a
• Some Bluetooth devices may not function properly with this product.
Bluetooth device has to be reconnected.
• When there is an obstacle or a person between the product and a
• This product cannot operate a Bluetooth device, and
Bluetooth device, connection may not be made or may disengage
multi-connection is not supported.
even within 32 ft (10 m).
• The product doesn't support telephone function, and
• As the distance between the product and a Bluetooth device
making or receiving a call while playing music stops the
becomes greater, the connection may not work properly.
music.
• Other Bluetooth devices which use the same frequency, such as
• Playing at the maximum volume of a Bluetooth device
medical devices, microwave ovens, or wireless LANs, may interfere
could distort the sound.
with the connection between the sound bar and a Bluetooth device.
• Accumulated dust or foreign substances could decrease
• Be cautious that volume control cannot be made to some Bluetooth
sound quality. Refer to ' c leaning procedure' at the back
devices connected by a Bluetooth dongle.
of this manual.
• Maximum output could be a bit low with some Bluetooth devices.
• Cards with magnetic strips, or other objects which can be damaged
by magnetic fields, should not be placed close to the sound bar.
Industry Canada Statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause
undesired operation of the device
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user' s
authority to operate the equipment.
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20 cm between the radiator and your body.
Operation of the equipment is subject to the following two conditions:
(1) this equipment or device may not be used to cause harmful interference and
(2) this equipment or device must accept any interference, including interference that
may cause undesirable operation.