melitta Wa 6610 Instrucciones Para Uso página 10

b Plug the cable (10) which is connected to the urn into the sok-
ket.
Putting into service
b Heat up the urn with hot water and leave for 10 minutes, befo-
re filtering coffee. This will ensure the coffee is kept the ideal
temperature of 80 - 85 °C.
b The urn must be used with Condensation tray (4) to ensure
the correct temperature and the high quality of coffee.
Filter coffie machines
The modular construction of the 6600 Series enables the system
to extend the Wa 6610 and Wa 6620 into a complete filter coffee
machine.
MELITTA quick filter (3)
b MELITTA-quick filter SF-KU 220 has been designet for the
1 - 20 litre suitable to urn Wa 6610 and Wa 6620. The correct
filter paper size is Pa 220 G (Oder no.: 1014228).
Through heater DE
With the through heater (DE 6610 - 6620) the hot water required
can be provided automatically.
Filtering
Due to the principle of unpressurized filtering, the MELITTA
system guarantees a high yield, ie: full use of the taste and aroma
of the ground coffee.
The richness and drinking quality of the drink are, however, only
provided by the correct ratio of quantity of water and the weighed
coffee.
This ratio is not always constant. It depends on the sort of coffee
used and on the required filtered quantity.
If only about 1 litre is filtered, 7 g/cup may be required, while for
greater quantities 5 g/cup may be sufficient.
This means that for the same quality of coffee, less weighed cof-
fee is required with increasing filtered quantity.
Preqaring the filter
b Place the filter bag (turn the projecting surfaces) into the filter
(3) and fill with ground coffee or tea. Recommended weigthed
amounts:
Coffee = about 5 - 7 g/cup or about 35 - 50 g/litre;
tea = about 1,5 g/cup or about 5 - 12 g/litre.
b Place the filter (3) on the heater (6).
Filtering
b Fill in boiling water in a gush. Keep adding water until the desi-
red amount is reached.
With a through heater DE the hot water can be provided automa-
tically.
Switching off the machine
b It is advisable that the machine is switched off when container
is empty and over night.
b Pull cable (10) out of the socket at the side of the machine and
put the plug in the special fitting provided (8).
Cleaning and care
WARNING!
The equipment must not be immersed in water, have water pou-
red over it or be sprayed with water for cleaning.
Professional coffee machines often represent a considerable in-
vestment, the value of which must be maintained. Well cared for
machines not only look good, but also make better coffee for a lon-
ger time. MELITTA provide a program of care for you for this pur-
pose.
10
Outside cleaning
b Wipe the plastic parts and steel surfaces regularly with a
damp cloth.
Heater
b Put cleaner into the urn. Fill with hot water. Clean with a sui-
table brush and empty through the urn tap. Flush out with hot
water.
Sight glasses
b Unscrew top cap and clean sight glass (7) with the sight glass
brush provided. Order no.: 200981.
Quick-closing tap
b Unscrew upper part and cleaning cap on quick-closing tap (9)
and clean the outgoing part with the sight glass brush.
The urn must be cleaned thoroughly each time milk has been
used.
Safety instructions
b Please keep these operating instructions near the machine,
so that it is always possible for the operator to operate the
machine correctly.
b The machine must not be operated outdoors.
b MELITTA SystemService is not liable for damage which is
caused by omitting maintenance, by unskilled interference
with the equipment or by fitting parts which are not equivalent
to the genuine ones.
b MELITTA SystemService reserve the right to make modifica-
tions for technical grogress, without prior notice.
Warranty conditions
We give a 12 month warranty for the correct operation of this
machine/system. The warranty period starts on the day the invoi-
ce is made out. During this period, faults due to poor material, faul-
ty design and faulty manufacture are remedied free of charge by
us or by a firm authorized by us, where proper use and correct tre-
atment are a precondition. Any replaced parts remain our property.
They must be made available to us.
We are not liable during the warranty period for damage to any
equipment, which is due to faulty maintenance and care. We do
not provide any guarantee for defects and faults on our equip-
ment, which are due to unskilled repairs or the fitting of spare parts
not equivalent to the genuine ones. Paint is expected from the
warranty. Warranty damage will only be recognised after a written
report by the Customer Service Department and checking at the
Works.
N
Beskrivelse av maskinens deler
1 Plugg
2 Lokk
3 Filterholder (etter ønske)
4 Konsenslokk
5 Baerehåndtak
6 Varmebehloder
7 Nivåglass
8 Kontaktholder
9 Tappekran for kaffe
10 Tilkoblingskabel