Connections To Be Made - Metra CHTO-02 Instrucciones De Instalación

Applications
CHRYSLER
Pacifica
DODGE
Ram 1500
Ram 2500
From the 16-pin harness to the aftermarket radio:
2004-2008
• Connect the (2) Red wires to the ignition wire.
• Disregard the Orange/White wire, it will not be used in this application.
2002-2005
• Connect the White wire to the left front positive speaker output.
2003-2005
• Connect the White/Black wire to the left front negative speaker output.
• Connect the Gray wire to the right front positive speaker output.
• Connect the Gray/Black wire to the right front negative speaker output.
• Connect the Green wire to the left rear positive speaker output.
• Connect the Green/Black wire to the left rear negative speaker output.
• Connect the Purple wire to the right rear positive speaker output.
• Connect the Purple/Black wire to the right rear negative speaker output.
• Connect the Blue/White wire to the amp turn on wire.
• Connect the Brown wire to the mute wire. If the aftermarket radio does not have a "mute" wire,
tape up the Brown wire.
The following (3) wires are for aftermarket multimedia/navigation radios that provide these wires (if not
required, tape them off and disregard them):
• Connect the Light Green wire to the parking brake wire (if applicable).
• Connect the Blue/Pink wire to the speed sense wire (if applicable).
CHTO-02

Connections to be made

2