Description Of Parts; Before First Use - Adler europe AD 6513 Manual De Uso

the appliance and its components before used.
6.Never operate the appliance with wet hands.
7.When you suspect that the appliance has been damaged NEVER try to repair it on
yourself.
8Do not wash the appliance under running water or so that water could penetrate it.

DESCRIPTION OF PARTS

1. Induction Cooker. 2. Display Window 3. Timer Button 4. Max Button
6. – Button 7. Mode Button

BEFORE FIRST USE

Remove the packing elements and align the power cord.
HOW TO USE
1. Place the induction cooker on a dry level surface.
2. Add food to the cookware.
3. Place the cookware within the circular guide indicated on the Induction Cooker.
NOTE: Ensure that the bottom of the cookware is clean as dirt may cause the bottom to
stick to the Induction Cooker.
IMPORTANT NOTE:
NEVER heat empty cookware. This will cause the unit to overheat, damage the
Cookware, and/or cause the unit to shut off.
4.Plug into a 220-240 ~50/60 Hz volt outlet. The unit will beep and all the indicator will light for one second.
5. Press the On/Off (10) Button to turn the unit on. The display window will show "---".
6. Press the Mode button (7) or + Button (8), the display window shows the default power "P6" and start heating. Press the +/ - buttons
(6/8) to select desired power level: "+" button (8) to increase and "-" button (6) to decrease the power.
There are total 9 power levels (P1: 200W, P2: 500W, P3: 800W, P4: 1000W, P5: 1200W, P6: 1400W, P7: 1600W, P8: 1800W, P9:
2000W).
7. Press the Mode Button (7) again to switch to the temperature mode. The display window shows the default temperature 200℃. The
indicator ℃ will flash. Press the +/ - buttons (6/8) to select desired temperature level: "+" button (8) to increase and "-" button (6) to
decrease the temperature.
There are total 8 temperature levels(60℃, 80℃, 120℃, 160℃, 180℃, 200℃, 220℃, 240℃, ) Of the pot/pan
The indicator ℃ will change from flashing to remain illuminated after the temperature (bottom of the pan) reaches the selected
temperature. The cooker will beep to notice the user.
8. If you wish to use the timer, press the Mode button (7) or + Button (8), the display window shows the default power "P6" and start
heating. Press the +/ - buttons (6/8) to select desired power level: "+" button (8) to increase and "-" button (6) to decrease the power
after that press the Timer Button (3). The Display window shows the default time "30" for 30 minutes and flashing. Press the +/ - buttons
to select cooking time from 0-180 mins: "+" button to increase and "-" button to decrease the time. If you press and hold + or- button, the
time will change faster. Once desired time is selected, press Timer Button again or wait 5 seconds then timer is now activated. Display
window will show the timer or power (if in temperature mode will show the timer or temperature) alternately.
When the programmed time has elapsed, the induction cooker will beep once and shut off automatically.
NOTE: If at any time during the cooking cycle you would like to cancel the timer, simply press the Timer Button.
9.Press and hold the Child Lock Button (9) ( for 3 seconds to access the child lock function. The display window shows the lock icon
8. + Button 9. Child Lock
6
5. Warm Button
10. On/ Off Button