Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 2
A
4
2
Step 2:
Place the decorative plastic cover (#4) on the chair's
base assembly (#2) as illustrated above. See Figure 2.
FIGURE 4
Warranty
• This product is covered by Courtyard
Creations Inc.'s 3 year limited warranty.
• Proof of purchase (dated register receipt)
is required for warranty claims.
• It remains the customer's responsibility for
freight and packing charges to and from the
service center.
V-3
4
A
4
DON'T RETURN TO STORE!
STOP
FIGURE 3
2
Step 3:
Insert the seat post (#3) into the hole in the center of the
base assembly (#2). Fasten them together by using bolt
(#6) and washer (#9). Make sure that all of the bolts
have been tightened completely.
See Figure 3 and Figure 4.
Note:
For ease with installation, we recommend that the seat
post (#3) be slightly olied or waxed before fastening it to
the base assembly (#2).
Caution:
To ensure one's safety during use of this swivel chair,
make sure that all of the bolts are completely tightened.
This chair has the ability to swivel; therefore, use by
young children should be adult supervised.
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water,
rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular
basis to ensure the proper performance and safety of
your swivel chair.
• In order to prolong the life and beauty of your swivel
chair, we recommend that it be stored in a dry and
protected area during off season periods.
STOP!
Missing A Part?
No Need To Go Back To
The Store
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
service.cci@polywares.com
PAGE 2 OF 2
3
9
6
35
#6 BOLT M6*35
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT
YOU HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
2
Publicidad
