Quick Start Guide - NORSE PROFESSIONAL SK155 Manual De Instrucciones

SK155

Quick Start Guide

These steps describe the quickest method to get your pressure washer up and running.
However, it is essential you fully read this manual to ensure you are familiar with the
general safety features, precautions and functions necessary to operate the product. Failure
to do so may result in injury and damage to your washer or personal items.
1. Slide the handle (01) on the
reel frame and fix it with
two screws (25). Tighten the
screws (25) using a suitable
screwdriver.
10
10e
Push the latch (10e) on the
spray gun (10) to open the
connecting port and insert the
connector of the high pressure
hose (08). Release the latch
(10e) to lock the hose (08) in
place. Check the connection by
pulling on the hose to ensure it
may not be pulled out.
01
25
09
2. Push the crank (02) into the opening of the reel (09), ensure it
clicks in place.
3. Attach the gun holder (11) to the handle (01) and secure it with
one screw (23).
4. Slide the lance guide (12) onto the support on the main unit and
secure it with the screw (24).
5. Screw the quick connector filter (04) to the water inlet (05).
#3
08
Securely fit the lance extension (20) by turning it anticlockwise and
letting it lock into place.
To remove: Press the accessory towards the spray gun (10) and turn
it clockwise to remove it.
English
23
02
20
#2
10e
10f
#1
31
20 10
© NØRSE
01
11 12
24
08
22
04
05
20
3