SK125
Quick Start Guide
These steps describe the quickest method to get your pressure washer up and running.
However, it is essential you fully read this manual to ensure you are familiar with the general
safety features, precautions and functions necessary to operate the product. Failure to do so
may result in injury and damage to your washer or personal items.
Attach the wheels by slotting them into
the underside of the rear of the washer.
They will click into place and lock.
Open the front of the washer by
releasing the catch.
Fit the hose reel to the brackets on the top side of the washer
using the supplied screws. The handle attaches to the reel
and is secured using the supplied screws. Slot the reel crank
handle into place.
Install the quick connector filter by screwing it onto the water
inlet of the power washer.
© NØRSE
English
3