Assembly - MYPV AC-THOR 9s Instrucciones De Montaje

Assembly

Remove the wall bracket from the rear of the AC•THOR 9s unit. To do this, slide the lock
underneath to the right.
Then fix the wall bracket to the wall with three screws. Three screws and three wall-plugs are
supplied. If the screws supplied are not suitable for the substrate, suitable screw must be
obtained.
TOP
To fix it to the wall bracket, the AC•THOR 9s is suspended in the wall bracket by the two long
slots on top and then fixed in place by locking it underneath (slide to the left).
Check the AC•THOR 9s is securely fixed!
When installing in an electrical cabinet, ensure sufficient cooling, for example through
ventilation slots in the switch cabinet door!
A minimum lateral distance of 7cm must be observed!
AC•THOR ® 9s Montageanleitung / Assembly Instructions, Version 210615 15