Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
1.
Connecting the hose : insert the hose end into the hose socket at the front of the base body and then twist
it. (Fig1)
To remove the hose accessories: press the adaptors at both sides of the hose end and then pull the hose out.
(Fig2)
2.
Connect the plastic tube to the curves end of the hose. (Fig3)
3.
Connect di purposes: carpet or
4.
Turn on the vacuum cleaner: insert the plug into a power socket which conform to that on the label for
power supply, and then press the on/o (Fig5, Fig6).
5.
Cable retraction: hold the plug and pull out the cable; press the cable retraction pedal, and then the
cable will be drawn in.(Fig7)
1
5
8
VACUUM CLEANER
TVC015010MD
4
Publicidad
Tabla de contenido
