Telstar TVC015010MD Manual De Instrucciones página 9

MAINTENANCE
1.
Changing the dust bag: when the Dust full indicator turns to be red, it is time to clear the dust or replace
the dust bag with a new one. (Fig1)
Open the front cover. (Fig2)
Turn around the bag holder and then take out the full dust bag. (Fig3)
2.
Exchanging the outlet cover by hand to exchange
3.
The motor protection a year, and should be returned to the unit once dry. If the is damage, a new
FAILURE CLEARANCE
Less vacuum power of the vacuum cleaner. The vacuum cleaner is operating with less suction power than
normal.
1. Empty the debris out of the full dust cup or the dust bag.
2. If a blockage is found in either the ground brush, hose or tubes, clear the blockage away then you can start
to sue the vacuum cleaner.
This symbol on the product or in the instructions means that your electrical and electronic equipment should
be disposed at the end of its life separately from your household waste. There are separate
collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased
the product.
9
VACUUM CLEANER
TVC015010MD