Ezviz LC3 Manual Del Usuario página 10

Installation
• Recommended installation height: 6-7 ft (1.8-2.2 m) above the
ground.
• The camera has a built-in memory card for video storage. There is
no need to install an additional SD card.
1. Shut off the electricity at the breaker.
• If you don't know where your breaker is or how to turn off power,
please consult with a licensed electrician.
• Keep the breaker off at any time during the installation process.
2. Separate the mounting base from camera.
Unscrew the base screw using screwdriver (not included in the
package) and pull the mounting base off the camera.
Mounting Base
3. Install the mounting base.
- Place drill template onto the surface you have chosen to mount the
base.
- (For cement wall only)
and insert anchors.
- Take the wires from the wall through the drill template and the rubber
of the mounting base.
- Use screws to fix the mounting base.
Base Screw
Drill screw holes according to the template
2