Electrical Safety - Grizzly HDR 21-150 Traducción Del Manual De Instrucciones Original

cleaning agents, rinse with plen-
ty of clean water.
• Store the equipment in a dry
place and out of reach of chil-
dren.
Caution! To avoid damage
to the equipment and any
possible person injury re-
sulting from this:
• Do not work with damaged or
incomplete equipment, or with
equipment that has been con-
verted without the approval of
the manufacturer. Before initial
operation, have a specialist
check that the required electri-
cal protection measures are in
place.
• Do not operate the equipment
if the mains cable, water sup-
ply or other important parts
such as the high-pressure
hose or gun are damaged/leak-
ing.
• Protect the pressure cleaner
from frost and dry running.
• High-pressure hoses, fittings
and couplings are important for
machine safety. Use only high-
pressure hoses, fittings and
couplings recommended by the
manufacturer.
• Use only original accessories
and do not carry out conver-
sion work on the equipment.
• Please read the notes in the
operating instructions on the
topic of "maintenance and
cleaning". Any measures
above and beyond these,
particularly opening the equip-
ment, are to be carried out by
an authorised electrician. In the
case of repairs, always contact
our service centre.

Electrical safety:

Caution: to avoid acci-
dents and injuries from
electric shocks:
• The plug and socket of an ex-
tension cable must be water-
tight!
Unsuitable extension cables
can be dangerous as people
can be harmed by an elec-
tric shock!
• Protect the electric plug con-
nections against moisture.
• If there is a risk of flooding, fix
the plug connections in an area
that is safe from flooding.
• Ensure that the mains voltage
matches the specifications on
the rating plate.
• Connection to the mains must
be carried out by an experi-
enced electrician and meet the
requirements of IEC 60364-1.
• The electrical installation shall
be according to national wiring
rules.
• The device must only be con-
nected to a mains socket via a
residual-current circuit breaker
(RCD) with a rated leakage
current of not more than 30
mA. Fuse: at least 13 ampere.
• Before each use, check the
equipment, cable and plug for
damage.
• If the power cable for this
equipment is damaged, it must
be replaced by the manufac-
turer, a customer service agent
of the same or a similarly quali-
fied person in order to prevent
hazards.
• Do not pull the plug from the
socket by the cable. Protect
GB
17