Backlight; Helpful Hints - Tivoli Audio The Connector El Manual Del Propietario

All manuals and user guides at all-guides.com
English
9. REPEAT: Press once to repeat the track currently playing. Press again to repeat all. Press a
third time to cancel repeat play.
10. SHUFFLE: Press to randomly shuffle tracks. Press again to cancel shuffle play.
11. BACKLIGHT: Press to activate the iPod's backlight for the amount of time set in the iPod's menu.
Note: Different iPod models have different software. The above commands may not work on
some iPod models or may behave differently than described. This is a function of your iPod's
software, not The Connector.

Helpful Hints:

Positioning: Place The Connector on a flat, stable surface. Do not leave the audio cable or power
cord where they might be tripped over. Should you experience any interference with your Tivoli
Audio radio (or other device) while using The Connector, move The Connector or the radio further
apart from each other.
Docking: When inserting your iPod, be sure it is firmly seated all the way down in the well. Also be
sure you are using the correct dock adapter for your iPod. If your iPod has a skin/case, you may
need to remove it since it could prevent a good connection. When docking your iPod, certain func-
tions will be unavailable while the iPod establishes communication with The Connector. Please
wait until the link has been established (the Tivoli Audio logo will stop flashing). Otherwise, you
may need to re-dock your device
Cleaning: Never use any harsh cleansers or solvents on The Connector's wood veneer or other
parts, as this could damage the finish.
Wood color: The Connector's base uses a real wood veneer. Since natural wood varies greatly, it
is not possible to achieve an exact wood color/grain match between The Connector and a Tivoli
Audio radio. You might also notice the wood darken over time with exposure to sunlight. Again,
this is normal for real wood.
iPod: If you have questions about how to use your iPod, please contact Apple Inc directly, or the
establishment where you purchased your iPod.
Re-set: Should you need to re-set The Connector for any reason, disconnect the power supply
and plug it back in.
11