Installation Steps; Package Contents - Axis 216FD Guia De Instalacion

AXIS 216FD Installation Guide
Fixed Dome Network Camera
This installation guide provides instructions for installing the AXIS 216FD Fixed Dome
Network Camera on your network. For all other aspects of using the product, please see the
AXIS 216FD User's Manual, available from www.axis.com or on the Axis Network Video
Product CD.

Installation steps

1. Check the package contents against the list below.
2. Install the hardware - page 4
3. Set the IP address - page 7
4. Set the password - page 13
5. Adjust the image - page 14

Package contents

Item
Fixed Dome Network Camera
Indoor power adapter
Note: The power adapter is country spe-
cific, please check that the type of power
adapter you are using is correct
Extension cable
Terminal block connector
Mounting kit
Documentation
Warranty document
All manuals and user guides at all-guides.com
AXIS 216FD
Installation Guide
Title/Variants
AXIS 216FD
Europe
UK
Australia
USA/Japan
Argentina
Korea
1.8m (5.9 ft) Power cable
4-pin I/O connector block
Screwdriver for tamper-proof screws
Tamper-proof screws
Drill template
AXIS 216FD Installation Guide
Axis Network Video Product CD
Important!
This product must be installed in
compliance with local laws and
regulations.
Page 3