Air Live HP-2000E Manual Del Usuario página 6

The Add button is used to add a remote device to the existing network by
entering the device password of the device. A dialog box will appear as
shown below in Figure 6. The dialog box allows the user to enter both a
device name and the password.
A confirmation box will appear if the password was entered correctly and if
the device was found in the powerline network. If a device was not found, the
user will be notified and suggestions to resolve common problems will be
presented.
AirLive ®
Figure 5: Set Device Password
Figure 6: Add Remote Device
85Mbps Powerline Ethernet
HP2000E
English
5
5