Air Live HP-2000E Manual Del Usuario página 8

The user can always reset to the HomePlug network (Public) by entering
"HomePlug" as the network name or by clicking on the Use Default button.
Note: Changing the network name to anything other than HomePlug will show
the network type on the main screen as Private.
The Set Local Device Only button can be used to change the network
name (network password) of the local device. If a new network password is
entered, all the devices seen on the Main panel prior to this will be no
longer present in the new network, effectively making the local devices not
to communicate to the devices who were in the old logical network.
Devices previously set up with the same logical network (same network
name) will appear in the device list afterward selecting this option.
The Set All Devices button is used to change the logical network of all
devices that appear on the Main panel whose Device's Password had
been entered for the same logical network. A dialog window will appear to
report the success of this operation. For devices whose device password's
were not entered, this operation will fail and will report a failure message.
Diagnostics Tab
The Diagnostics screen shows System information and a history of all remote
devices seen over a period of time. The appearance is shown in Figure 9.
AirLive ®
Figure 8: Privacy Screen
85Mbps Powerline Ethernet
HP2000E
English
7
7