General Information; Technical Specifications - Artecristal ELISEO Manual De Instrucciones

Installation Installation

GENERAL INFORMATION

Brass body: durable and ideal for prolonged contact with water.
Ceramic Valve Cartridge: Ensures smooth operating life of the handle and drip-free performance.
Minimum lead content: does not affect water quality.
Straight lines: elegant and modern image.

TECHNICAL SPECIFICATIONS

Recommended water pressure 0.1~ 0.5MPa
Test pressure: 0.9MPa
Recommended cold water temperature: 2-29º C
Recommended hot water temperature: 55-85 ºC
Note: The pressure difference between cold and hot water should
not exceed 0.1 MPa.
ATTENTION
This product has been tested and adjusted by the company, please do not disassemble without
authorization, as it may damage its original operation.
Please always rely on experienced professionals to install the product.
Regarding the installation of the faucet, you should try not to hit it with hard objects or let the glue or
cement come into contact with the product as it may damage the original coating.
Please note that you should first clean the residues inside the pipe before installing the tap, in order to
avoid clogging due to dirt that could affect the use of the product.
After installation and use of the product, it is advisable to use a wrench to unscrew the nozzle and rinse
impurities.
Finally, check that all connections are tight to avoid leaks.