Replacing The Battery - HAMPTON BAY 873046002747 Manual De Instrucciones

ground with hard soil, to prevent breaking
the ground spike, use trowel to loose soil
first. Attach the light to mounting pole (3).
(FIG.3)
Charging the battery:
For optimum performance, it is best to install the solar lights in
full sunlight and charge for 10-12 hours. Allow the light to run at
least 8-12 entire charging and discharging cycles to reach
battery's maximum capacity.

REPLACING THE BATTERY

For best performance, replace with rechargeable 3.2V LiFePO4
battery every 3 years or when performance diminishes.
Step 1
Twist and remove lens (2) from
top housing (1). (FIG.4)
4
⑶
⑷
FIG. 3
⑴
⑵
FIG. 4