Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1. Open CAPXL and remove the existing black camera bracket
(top middle) by loosening and removing the wingnut.
2. Ensure CAPXL camera window is clean and free of any
obstructions. Cleaning the camera window with a clean lens
wipe or lens cloth is recommended.
3. Remove all items from shipping carton and ensure all
required items are present: camera assembly, camera
bracket, USB cable, and mounting hardware bag.
4. Use the mounting hardware to attach the new bracket with
camera to the CAPXL. Securely tighten.
5. Use pliers to unplug the upper right dummy plug from USB
socket on control board (controller).
6. USB PORT #3 MUST BE USED to connect the camera. The
Micro USB end of the USB cable goes into the camera and
the standard USB end of the cable specifi cally connects to
USB port 3, (the upper right USB port on the controller.)
(See Figure 1.B)
7. Route and secure USB cable with included tie-wraps.
(Figure 2)
8. Turn on power to the CAPXL.
9. Enter CAPXL Admin Mode using the #1 dip switch. Select
the "Audio / Video" tab and confi rm the video feed appears,
the angle and orientation is correct.
10. Refer to the myQ
®
Business™ Quickstart Guide and visit
the help section of the myQ
videos and futher assistance with setting up the camera
functions. Features such as the recording of events, the
Guest View Feature, and more are set up within the myQ
Business™ account.
Access your myQ
®
Business™ account at:
https://www.myQBusiness.com
myQ
®
Business™ Help and Tutorial Videos:
https://www.myQBusiness.com/Help
NOTE: Options such as live streaming within myQ
require an access control subscription.
NOTE: Please refer to the specifi c jurisdiction to determine if
specifi c signage will be required for video use and monitoring.
LiftMaster Support
Web
FAQs
®
Dealer Installation & myQ
Commercial / Professional support: 800-528-2806
LiftMaster Training Academy
Dealer Extranet
Check out our CAPXL videos on YouTube. Go to YouTube.com/LiftmasterSupport, and search within the channel for "CAPXL".
(Figure 1.A)
(Figure 3)
®
Business™ website for tutorial
®
Business™
Business™ Support Videos
Carton Inventory
• Camera assembly
• Camera bracket
• USB cable
• Mounting hardware bag (2x Screws)
T o p
B o t t o m
1. A
Figure 1. Removing the dummy USB and connecting to USB Port #3 on the upper right side of the controller.
®
Figure 2. Routing the USB cable.
ON
1 2 3 4
Figure 3. Admin Mode.
Resources
LiftMaster.com
Support.Dealer.LiftMaster.com
YouTube.com/LiftmasterSupport
Mon-Fri 5:00 a.m. to 6:00 p.m. MST
LiftMasterTraining.com
Dealer.LiftMaster.com/Login
r t # 3
S B P o
i g h t U
T o p R
1. B
Dip Switch #1
on the Power / Internet board
enters Admin Mode.
ON
Publicidad
